Home > Bearing Basic Knowledge > Minimum Loading > Minimum Load-Thrust Roller Bearings

Minimum Load-Thrust Roller Bearings

In order to keep bearings working in a good condition, a minimum load must be imposed on bearings, particularly on bearings working at high speeds, high accelerations, or with the load direction changing frequently, because under these working conditions, inertial force of balls and cage and lubricant friction will have bad influence on the rotation of bearings,  and detrimental sliding movement may be caused.

The minimum load of a thrust roller bearing can be obtained from:

Cylindrical roller thrust bearings

 Minimum Load-Thrust Roller Bearings       Minimum Load-Thrust Roller Bearings    kN

Spherical roller thrust bearing

                Minimum Load-Thrust Roller Bearings kN

A - Minimum load constant, see bearing dimension tables.

n - Speedr/min

Fr- Radial load (when combined load), kN

C0 Basic static load rating, kN

When bearings are started at low ambient temperatures or in the condition where the viscosity of lubricant is very high, a larger minimum load is required. Usually, the weight of the bearing supporting parts plus the load on the bearing have been over the minimum load. If the weight cannot be up to the minimum load, then extra radial load must be imposed on this type of bearing in order to meet the requirement of minimum load. The requirement can be met through preloading in axial with springs.

Contact Us

Address

96 Jianshe Road, Jianxi District,Luoyang, Henan, China

Email

sales@lycbearing.com

Tel

+86 379 64984177

Fax

+86 379 64912225